Tennant Rubber has had an excellent trading relationship with Griflex over many years. Our access to so many different markets has meant that their range of products perfectly compliments our level of service.
Now that the Griflex brand is back and manufacturing in the UK, Tennant Rubber are delighted to be keeping many of their products on the shelf here in Nottingham with quick access to the full range in their new facility in the West Midlands.
This leviathan may look like the Mother Ood, but it is a seed drill and stacked to the gunnels with Griflex hose. This and the picture above of a bottle filler, shows some of the diversity of the range of Griflex hose that Tennant Rubber can provide.
Check out the website or give us a call to arrange a site visit.
These systems are designed to be able to allow large structures controlled movement. This can be used to help make a structure resistant to natural forces such as high winds, earth tremors etc, or to build in designed movement to allow for expansion of components from changes in temperature, such as with bridges.
This project required the application of two types of polymer, PTFE and PEEK, embedded in a carbon steel base plate
Both these materials are used for their coefficient of friction, which also makes them hard to bond, and the PEEK requires extra mechanical fixing with the use of counter-sunk bolts.
These are then matched with a larger base plate made from a mirror polished steel, allowing free movement with high load bearing capabilities.
Clever stuff eh?. See, it’s not just Rubber, we do more than it says on the tin!
Sometimes you just have to use those things that are available to you at the time. We needed something with a big diameter that we could fix to a bench temporarily to help support this large flexible.
Things like this can be harder to handle than Liam after a morning session on his favourite energy drink. But the end result is a completely continuous interface between the lining and the flange, meaning less clumping of powders when processing and less weak points.
The soft-bond technology used in creating the flange, means that the flexibility of the rubber isn’t restricted by the adhesive and therefore there is less residual stress in the structure.
Bruce’s bonus is that it folds up neatly for packing too!
Who’s going to Goose Fair then? For those customers of ours that are not from Nottingham, then we don’t actually sell Geese at the fair anymore, but it goes back to the 13th Century when geese where driven to Nottingham in the autumn. It used to be held in Slab Square but was moved to The Forest Recreation Ground and is now host to hundreds of rides. More about the details of Goose Fair can be found on the Nottingham City Council Website
But you can’t put smells on a website……yet! and Goose Fair has it’s own evocative aroma. A heady mixture of toffee apples, burgers, candy floss, adrenaline, ozone and exhaust fumes….It’s nicer than it sounds, honest.
Beryl was slightly worried when she was told that her partner for Strictly was going to be Donald…..
…..but then she found out it was her old pal from Warner BrosLet’s hope that’s not all folks!!
Congratulations to Tina McMennamin, Rhys Mossop and Paul McBride on winning the prizes for August in our Olympic Special. Thanks to all who took part.
Check her out in the bake-off this year.No soggy bottoms here.
A few weeks ago we let you know about a flexible hopper that we fabricated for a powder processing plant in the far east (no we don’t mean Spalding!) Well the plant is up and running with our hopper in place as you can see below. Now we can understand why the exit hole had to be off-set in such an unusual way to miss the belt. Always good to get the end of the story, especially with so much complicated geometry to try and match up.
It’s that time of year again. Beryl’s been hard at it in front of the oven. Let’s hope she remains calm under pressure and her feathers don’t get ruffled. Good luck to everyone taking part in the bake-off.
So that’s it then. The Olympics are over for another four years. A fantastic performance from Team GB. Can’t wait for Tokyo….but wait….news just coming in from Rio…..Beryl has finally learnt to fly…up up and away. At least her shadow makes her look like an Eagle coming in to land.
At 2.00pm yesterday, this butterfly valve was on our customer’s production line. The seal failed and the line went down. Our Production Team (partially viewed above, he’s shy!!….not!!) dropped everything and stayed late last night to strip it down.
Here’s Beryl amongst the debris at 7.00 this morning.
We re-started work on it first thing and by 9.30 it was was curing and awaiting finishing.
Ready for dispatch and back with a very satisfied customer by 11.30.
Job well done
Thanks to everyone involved who made it happen.